LED Work Light for Off-Road SUV: Brighten Up Your Adventure
Share
When it comes to off-road adventures, having proper illumination is crucial. Whether you’re going camping, hiking, or driving through rough terrain, you need reliable lighting to ensure your safety and convenience. This is where LED work lights come in handy.
Table of Contents
There are 12 options that should be paid attention to when choosing LED work lights:
Many people encounter many reasons why the lighting fails to achieve the expected effect during their work. For many companies that need to use vehicle LED work lights in their working environments, many times the purchase of some LED work lights in the market fails to achieve the effect as advertised, which makes many customers feel very distressed, which will greatly delay their work. In the past 15 years, TEEHON has collected business and talked with customers, including a lot of knowledge from customer feedback, hoping to help more people to correctly choose and understand LED work lights, which will give them more confidence when choosing With more experience, you can choose more suitable products and experience more satisfactory results.
1.Lumens
When you’re choosing an LED work light based on lumen output, should you need to know which lumen output is listed on the packaging or information sheet? There are three different measurement methods: theoretical lumens (theoretically achievable lumen value, which is theoretically achievable, but it is difficult to achieve in reality), cold lumens and effective (measured) lumens, but only effective ( measurement) output is only useful.
Just a quick explanation: Theoretical lumen output is gross. Effective (measured) lumen output is net and is actually tested, so effective (measured) lumen output is the actual lumens of the product. There can be a 50% to 70% difference between gross and net value. So be aware of this!
2.Price
If your buying decision is based on price or a combination of lumen output and price, then you need to be careful with your comparisons, as you’re not sure what type of lumen output is stated on the packaging or product data sheet, you may Only get 30% to 50% of expected lumen output. This may throw your expectations off.
3.Color temperature
High color temperatures (greater than 6000K) emit cool white light (close to blue), which can cause severe eye strain. You cannot use this color temperature for a long time, so the general color temperature is 6000K (full white light)
4.Electromagnetic Compatibility (EMC)
Work lights without EMC products can be subject to magnetic field interference from radios, which in severe cases can cause your computer to go out of control, and in the worst case can cause mobile machinery to stop functioning. If you are working in a precision machine, you can consider anti-interference EMC to avoid magnetic field interference from damaging the machine.
5.Vibration
If you choose LED work lights without checking whether the quality of the bracket of the work light can withstand the vibration of mobile machinery or uneven ground, it may cause the bracket to become loose or cracked, and the circuit board components inside the LED work light may also be loose. This would mean that the work light would not work.
6.Light quality
Hot spots, circles, shadows, and several different color temperatures are signs of poor light quality. Eyes focus on the brightest spot in the job, and in poor light quality your eyes will be irritated by shadows and your vision will be limited.
7.Pattern of light
The so-called “Spot/flood/combo” light width can be very narrow, and the lighting range given is very limited. If you are annoyed by the template of a single beam, then you should choose the multi-beam mode later, which can save you from being forced to Take the hassle out of buying a second or even a third LED work light to illuminate your entire work area.
8.Work lights with open reflectors
You need to be aware that if the LED work light has an open reflector and a clear lens, you can see some problems caused by the LEDs, they can give you a glare.
9.The location where the product is installed
Before buying LED work lights, you need to know which positions you want to cover (length, width and height), which will allow you to choose your product better and not buy multiple times because of the wrong size
10.Too much light
LED work lights with high lumen output on the surface but short distances can produce intense heat and strong glare, which can make you uncomfortable.
11.The position of the LED work light is wrong
Picking the wrong lighting position, or the wrong height, often results in too much light, which can lead to concentrated heat and uncomfortable glare.
12.LED lighting technology
It is possible to update lighting and LED technology every year or even every month. If you want to know more detailed information, you must need the knowledge and consultation of professionals. During the communication process, you can capture more and better information.
If you can think of the above problems in your purchase decision, you will take a big step forward, which will increase your knowledge a lot, and you will have a clearer lighting solution when you choose later. You can also contact TEEHON experts for consultation and discussion, which will help provide the best solution for your vehicle design and bring you certain design ideas.
Have Anything To Ask Us?
Please fill in your email in the form and we'll get back to assist you soon!